1. Home
  2. The Hybrid Grid
  3. Power Inverters
  4. Integrated Inverter/Chargers
  5. 8kW Pure Sine Wave 48V Inverter/Charger with ATS
8kW Pure Sine Wave 48V Inverter/Charger with ATS
8kW Pure Sine Wave 48V Inverter/Charger with ATS

8kW Pure Sine Wave 48V Inverter/Charger with ATS

Write a Review
On sale: $1,899.00 $1,599.00
An 8kW pure sine wave power inverter well suited to powering a comprehensive critical load subpanel. Coupled with a battery bank and solar generation, you can take your critical circuits permanently off grid with grid backup.
Availability: Coming soon! Free Shipping.

Choose Options

This 8kWwatt inverter converts 48VDC to 120/240VAC is transformer based low frequency power inverter/battery charger.
Full sine wave power inverter designed to survive 10+ years in the harshest conditions.
The 8,000 watt power inverter gives out 300% surge power of up to24KW for 20 seconds to meet your household or business’s energy needs, meaning, you no longer have to oversize inverter wattage to meet high surges from loads.
Our full sine wave 8KW inverter works with very little power loss, outputs an average THD of 3% , its idle consumption is 180 watts, and  its peak DC to AC efficiency is notably 90% .
It will significantly outperform any other competing 8KW inverter models in terms of operating costs over the long-term as it reduces battery discharge cycles and prolongs battery life.
The built-in transfer switch allows it to automatically switch between battery bank and grid power (or generators) with a transfer time of 10 milliseconds.
If you are using a generator instead of utility power as backup, the auto generator starter on the inverter will automatically start the generator when battery voltage is low enough.
The built-in 80 amp at 48V battery charger uses AC power, from the grid or from a generator, to recharge a battery bank.
This inverter is capable of continuous output of 8KW at 100 degrees F and withstanding thermal fluctuations because of its over-temperature protection and thermally-controlled fans.
It’s protected from humidity or airborne dust and dirt thanks to its conformal-coated (or “marine-coated”) boards.
This inverter  is split-phase, it requires a 240VAC input, and will output 240VAC split phase to your distribution panel at 60Hz.

Related Items

LiFePO4 48V (51.2v) 200ah 10kWh Battery System wIth BMS
$2,699.00
In stock and ready to ship Free Shipping.
LiFePO4 48V (51.2v) 280ah 14kWh Battery System wIth BMS
$3,399.00
In stock and ready to ship Free Shipping.

Recently Viewed Items