1. Home
  2. The Hybrid Grid
  3. Power Inverters
  4. Integrated Inverter/Chargers
  5. 10kW Pure Sine Wave 48V Inverter/Charger with ATS
10kW Pure Sine Wave 48V Inverter/Charger with ATS
10kW Pure Sine Wave 48V Inverter/Charger with ATS

10kW Pure Sine Wave 48V Inverter/Charger with ATS

Write a Review
On sale: $2,199.00 $1,999.00
A 10Kw pure sine wave power inverter capable of handling smaller house energy needs. Coupled with a battery bank and solar generation, most smaller homes could shed the public grid for everyday use(except for heavy 240VAC circuits such as central air conditoining in warm climates).
Availability: Out of Stock. Free Shipping.

Choose Options

This 10kWwatt inverter converts 48VDC to 120/240VAC is a transformer based low frequency inverter charger .
Full sine wave power inverter designed to survive 10+ years in the harshest conditions.
The 10,000 watt inverter gives out 300% surge power of up to 30KW for 20 seconds to meet your household or business’s energy needs, meaning, you no longer have to oversize inverter wattage to meet high surges from loads.
Our full sine wave 10KW inverter works with very little power loss, outputs an average THD of 3% , its idle consumption is 180 watts, and  its peak DC to AC efficiency is notably 90% .
It will significantly outperform any other competing 10KW inverter models in terms of operating costs over the long-term as it reduces battery discharge cycles and prolongs battery life.
The built-in transfer switch allows it to automatically switch between battery bank and grid power (or generators) with a transfer time of 10 milliseconds.
If you are using a generator instead of utility power as backup, the auto generator starter on the full sine wave inverter will automatically start the generator when battery voltage is low enough.
It gives emergency backup power for your residence or business or reliable electricity to your hunting cabin or off-grid vacation home.
The built-in 100 amp battery charger uses AC power, from the grid or from a generator, to recharge a battery bank.
This UL 1741 compliant 10KW inverter is capable of outputting 10KW at 40 degrees Celsius and withstanding thermal fluctuations because of its over-temperature protection and thermally-controlled fans.
It’s protected from humidity or airborne dust and dirt thanks to its conformal-coated (or “marine-coated”) boards.
This inverter  is split-phase, it requires a 240Vac input, and will output 240VAC split phase to your panel at 60Hz.

Related Items

LiFePO4 48V (51.2v) 280ah 14kWh Battery System wIth BMS
In stock and ready to ship Free Shipping.

Recently Viewed Items